Network
Fazle Hussain, PhD
- Research Institute - Full Affiliate Member
- Houston Methodist
Person: Secondary-RI affiliate
Milos Kojic, PhD
- Academic Institute - Professor of Nanomedicine
- Research Institute - Full Member
- Department of Nanomedicine
- Dr. Mary and Ron Neal Cancer Center
- Houston Methodist
Person: Primary faculty-empl
Francesco Pesavento
- University of Padua
- Università di Padova
- University of Padova
- University Od Padova
- University of Pdua
- Dept. of Civil, Environmental and Architectural Eng., University of Padua
- Technical University of Lodz
- Universita' degli Studi di Padova
- Department of Civil, Environmental and Architectural Engineering
- Universita di Padova
- University of Padua
- Lodz University of Technology
- Tech. Univ. of Lodz
- University of Padova
- Environmental and Architectural Engineering
- Department of Structural Engineering
- Department of Civil, Environmental and Architectural Engineering, Università di Padova
- Dipartimento di Costruzioni e Trasporti
- Dipartimento di Costruzioni e Trasporti Facolta' di Ingegneria
- Dept. Constructions Transportations
External person
Dariusz Gawin
- Technical University of Łódź
- Technical University of Lodz
- Technical University of Lódź
- Technical Univ of Lodz
- Al. Politechniki 6
- Technical University of Ldz
- Tech. Univ. of Lodz
- Technical University of ódÿ
- Dept. of Building Physics and Building Materials, Tech. University of Lodz
- Tech. University of Lodz
- Technical University of Lódz
- Lodz University of Technology
- Tech. Univ. of Lodz
- Dept of Building Phy + Bdg Materials
- Department of Building Physics and Building Materials
- Department of Building Physics
- Dept. Bldg. Physics/Bldg. Mat.
- Department of Building Physics
External person
D. P. Boso
- University of Padua
- University of Padova
- Università di Padova
- Universita' di Padova
- Dipartimento di Costruzioni e Trasporti
- University of Padua
- Department of Civil, Environmental and Architectural Engineering, Università di Padova
- Università Degli Studi di Padova
- University of Padova
- Dipartimento di Ingegneria Civile
- Dipartimento di Ingegneria Civile Edile e Ambientale
- Dept. Constructions Transportations
- Dipartimento ICEA
External person
Luciano Simoni
- University of Padua
- University of Padua
- Italy
- University of Padova
- Università DiPadova
- Univ of Padova
- Univ di Padova
- Università di Padova
- Dept. Constr. and Transp. Eng.
- Univ Coll of Swansea
- Department of Civil, Environmental and Architectural Engineering
- Swansea University
- University of Padova
- Swansea University
- Environmental and Architectural Engineering
- Environmental and Architectural Engineering
- Dipartimento di Costruzioni e Trasporti
- Dept. Constructions Transportations
- Ist. Sci. e Tec. Delle Costruzioni
- Department of Structural Engineering
- Department of Civil, Environmental and Architectural Engineering, Università di Padova
- Dept. of Civil, Environmental and Architectural Eng., University of Padua
External person
Marek Lefik
- Technical University of Lodz
- Technical University of Łódz
- Technical University of Łódź
- Technical University of LŁódź
- Technical University of ódÿ
- Tech. Univ. of łódz
- Technical University
- Technical University of Lódź
- Technical University of Lódz
- Technical University of Łodz
- Lodz University of Technology
- Tech. Univ. of Lodz
- Department of Mechanics of Materials
- Department of Geotechnical Engineering and Engineering Structures
- Chair Geotechnical Eng. Eng. Struct.
- Department of Mechanics of Materials
External person
L. Sanavia
- Università di Padova
- University of Padua
- Dalian Univ of Technology
- University of Padova
- Al. Politechniki 6
- Univ. Padua, Via F. Marzolo 9, 35131
- Universita di Padova
- Università degli Studi di Padova
- University of Padua
- Lodz University of Technology
- Dalian University of Technology
- Tech. Univ. of Lodz
- University of Padova
- Dalian University of Technology
- Dipartimento di Ingegneria Civile Edile e Ambientale
- Dept of Building Phy + Bdg Materials
- Department of Civil, Environmental and Architectural Engineering, Università di Padova
- Dept. of Civil, Environmental and Architectural Eng., University of Padua
- Department of Structural Engineering
- Dept. Constructions Transportations
- Dipartimento di Ingegneria Civile
- Istituto di Scienza e Tecnica delle Construzioni
External person
C. E. Majorana
- University of Padua
- Technical Univ of Lodz
- University of Padova
- Istituto di Costruzioni, University of Padua
- TC 114-CCS Comp. Programmes Creep S
- Univ of Padova
- University of Padua
- RILEM
- Technical University of Lodz
- Università di Padova
- Université di Padova
- Italy
- Universita di Padova
- Lodz University of Technology
- Tech. Univ. of Lodz
- University of Padova
- EURATOM
- Dipartimento di Costruzioni e Trasporti
- Ist. Sci. e Tec. Delle Costruzioni
- Dept. Constructions Transportations
- Dipartimento di Ingegneria Civile
- Agenzia nazionale per le nuove tecnologie, l'energia e lo sviluppo economico sostenibile
External person
H. W. Zhang
- Dalian University of Technology
- Univ of Padua
- Dalian Univ of Technology
- Res. Inst. Eng. Mechanics
- University of Padua
- University of Padova
- Dalian University of Technology
- Stt. Key Lab. Struct. Anal. I.
- Research Institute of Engineering Mechanics
- Stt. Key Lab. Struct. Anal./I.E.
- Res. Inst. of Engineering Mechanics
- Stt. Key Lab. Struct. Anal. I.
External person
G. Sciumè
- University of Padua
- Ecole Normale Supérieure de Cachan
- University of Padua
- Department of Civil, Environmental and Architectural Engineering, University of Padua
- University of Padova
- EcoleNormaleSupérieure
- Department of Civil, Environmental and Architectural Engineering, University of Padova
- Department of Civil, Environmental and Architectural Engineering, Università di Padova
- Department of Innovation Engineering, University of Salento
- Department of Innovation Engineering
- University of Salento
- École normale supérieure Paris-Saclay
- University of Salento
- University of Padova
- Ecole Normale Supérieure de Cachan
- University of Salento
- Université Bordeaux-Ségalen
- Université de Bordeaux
- Laboratoire de Mécanique et Technologie
- Université Paris-Saclay
- Institut de Mécanique et d'Ingénierie I2M - Dép. TREFLE
- Institut de Mécanique et d’Ingénierie I2M – Dép. TREFLE
- Bordeaux INP
- Dept. of Civil, Environmental and Architectural Eng., University of Padua
- ComUE Paris-Saclay
- Ecole Normale Supérieure de Cachan
External person
U. Galvanetto
- Università di Padova
- University of Padua
- Univ of Padova
- University of Padova
- Imperial College of Science, Technology and Medicine
- Univ of Padua
- Universita di Padova
- University of Padua
- Imperial College London
- Imp. Coll. Sch. Sci., Technol./Med.
- University of Padova
- Dipartimento di Costruzioni e Trasporti
- Department of Aeronautics
- Dept. Constructions Transportations
- Center of Studies and Activities for Space (CISAS)-G. Colombo
- Dept. of Industrial Engineering
External person
Raffaella Santagiuliana
- University of Padua
- University of Padua
- University of Padova
- Department of Civil, Environmental and Architectural Engineering
- Università Degli Studi di Padova
- University of Padova
- Dept. of Civil, Environmental and Architectural Eng., University of Padua
- Department of Civil, Environmental and Architectural Engineering, Università di Padova
- Italian Institute of Technology
- Dipartimento di Costruzioni e Trasporti
- Laboratory of Nanotechnology for Precision Medicine
- Dipartimento di Ingegneria Civile Edile e Ambientale
External person
W. G. Gray
- University of North Carolina at Chapel Hill
- University of North Carolina
- The University of North Carolina at Chapel Hill
- Department of Environmental Sciences and Engineering, University of North Carolina at Chapel Hill
- University of Padua
- University of Padua
- University of Padova
- University of North Carolina at Chapel Hill
- Dept. of Environmental Sciences and Engineering
- Department of Environmental Sciences and Engineering
- Dept. of Constructions and Transpo.
- Department of Environmental Sciences and Engineering
- Department of Civil Engineering and Geological Sciences
- University of Notre Dame
- University of Notre Dame
- University of Notre Dame
- Department of Environmental Sciences and Engineering
External person
G. Zavarise
- Costruzioni
- Univ of Padova
- Polytechnic University of Turin
- Istituto di Scienza e Techica delle Costrusioni
- University of Padua
- Università di Padova
- Istituto di Scienza e Tecnica delle
- Universita di Padova
- University of Padova
- Politecnico di Torino
- Dipartimento di Costruzioni e Trasporti
- Dipto. di Ingegneria Strutturale
- Ist. Sci. e Tec. Delle Costruzioni
- Dipartimento di Ingegneria Strutturale e Geotecnica
- Dipartimento di Ingegneria Civile
- Department of Structural Engineering and Geotechnics
External person
Valentina Salomoni
- University of Padua
- Faculty of Engineering
- Univ. degli Studi di Padova
- University of Padua
- Université di Padova
- Dept. Constr. and Transp. Eng.
- University of Padova
- Dipartimento di Costruzioni e Trasporti
- Dept. Constructions Transportations
- Dept. of Struct. and Transp. Eng.
- Faculty of Engineering
- Dept. of Struct. and Transp. Eng.
External person
Stefano Secchi
- Italy Corso Stati Uniti 4
- Isib
- CNR
- ISIB-Istituto di Ingegneria Biomedica
- CNR ISIB
- CNR-LADSEB
- ISIB
- National Research Council of Italy
- IOR
- CNR
- CNR-Centro Nazionale Delle Ricerche
External person
P. Wriggers
- Costruzioni
- Universität Hannover
- Institute of Mechanics
- Inst. F. Mech. - TH
- Istituto di Scienza e Tecnica delle
- University of Hannover
- University of Hanover
- Leibniz University Hannover
- University of Hannover
- Institute of Mechanics and Computational Mechanics
- Inst. F. Baumech./Numerische Mech.
- Institut für Baumechanik und Numerische Mechanik
- Darmstadt University of Technology
- Institut für Mechanik
External person
P. Decuzzi
- Baylor College of Medicine
- University of Texas Health Science Center at Houston
- Department of Drug Discovery and Development, Fondazione Istituto Italiano di Tecnologia
- Magna Græcia University
- Politecnico di Bari
- University of Texas System
- TASC-INFM CNR
- Ohio State University
- Center for the Rational Design of Multifunctional Nanoconstructs
- Univ. of Texas
- Italian Institute of Technology
- Italian Institute of Technology
- Houston Methodist
- Department of Translational Imaging and Department of Nanomedicine, The Methodist Hospital Research Institute
- BioNEM-Center of Bio-Nanotechnology and Engineering for Medicine
- Brown Foundation Institute of Molecular Medicine
- School of Health Information Sciences
- Department of Experimental and Clinical Medicine
- Department of Mechanical and Biomedical Engineering
- Center of Excellence in Computational Mechanics
- Center of Excellence in Computational Mechanics
- Department of Drug Discovery and Development
- The Methodist Hospital Research Institute
- Department of Experimental and Clinical Medicine, University of Magna Graecia
- Department of Experimental and Clinical Medicine
- Sch. of Health Information Sciences
- Dipto. di Med. Sperimentale e Clin.
- Heart and Lung Research Institute
- Ctro. di Eccellenza la Mecc. Comput.
- Brown Foundation Institute of Molecular Medicine for the Prevention of Human Disease
- Center of Excellence in Computational Mechanics - CEMeC
- Department of Nanomedicine and Biomedical Engineering
- Ctr. Excellence in Compl. Mechanics
- Nanotribology Lab. Info. Storage M.
- Ohio State University
- Dorothy M. Davis Heart and Lung Institute
- ASME/NanoEngineering for Medicine and Biology
- Department of Clinical and Experimental Medicine
- TASC
- Department of Mechanical Engineering
- Universita' degli Studi Magna Græcia
- Department of Experimental and Clinical Medicine
- Magna Græcia University
External person
Roland W. Lewis
- Institute of Numerical Methods in Engineering, University College of Swansea
- University of Wales Swansea
- University of Padua
- University College of Swansea
- Univ Coll of Swansea
- Swansea University
- University of Padova
- Swansea University
- Department of Civil Engineering
External person
Gabriella Bolzon
- Polytechnic University of Milan
- Politecnico di Milano
- University of Padua
- Dipartimento di Ingegneria Strutturale
- Ist. Sci. e Tec. Delle Costruzioni
- University of Padova
External person
Renato V. Vitaliani
- Univ of Padova
- Ingegneria - Università di Padova -
- Tecnica delle Costruzioni Universita di Padova -
- University of Padua
- University of Padova
- Istituto di Scienza
- Dipartimento di Ingegneria Civile
External person
Wolfgang A. Wall
- Technical University of Munich
- Technical University of Munich
- Institute for Computational Mechanics
External person
Tao Ni
- College of Civil and Transportation Engineering
- Dept. of Industrial Engineering
- University of Padova
- Hohai University
- Center of Studies and Activities for Space (CISAS)-G. Colombo
- Chengdu University of Technology
External person
Mirco Zaccariotto
- Center of Studies and Activities for Space (CISAS)-G. Colombo
- Dept. of Industrial Engineering
- University of Padova
External person
S. Odorizzi
- University of Padova
- delle Costruzioni, Padua, Italy
- University of Padua
- University of Padova
- Civil Engineering Department
External person
O. C. Zienkiewicz
- Università di Padova
- University of Wales
- Universita di Padova
- University of Padua
- Swansea University
- University of Padova
- Swansea University
- UCL
- Institute of Numerical Methods in Engineering, University College of Swansea
- University College
External person
Enrico Milanese
- University of Padua
- University of Padova
- Environmental and Architectural Engineering
- Swiss Federal Institute of Technology Lausanne
- Department of Civil, Environmental and Architectural Engineering, Università di Padova
- Ecole Polytechnique Federale de Lausanne
- Civil Engineering Institute
- EPFL (Ecole Polytechnique Federale de Lausanne)
External person
S. Dal Pont
- BCC-LCPC
- ENPC
- Université Paris-Est
- Università di Padova
- ENPC-LAMI
- École des Ponts ParisTech
- University of Padua
- Laboratoire central des ponts et chaussées
- Paris-Est Sup
- Navier Institute
- Laboratoire Central des Ponts et Chaussées
- University of Padova
- Université Paris-Est
- Dipartimento di Costruzioni e Trasporti
- Laboratoire d'Analyse des Matériaux et Identification
- CERMES
- Division Bétons et Composites Cimentaires
- Navier Institute
- Université Gustave Eiffel
External person
Roberto Gori
- Univ of Padua
- Univ of Padova
- University of Padua
- Italy
- University of Padua
- University of Padova
- Ist. Sci. e Tec. Delle Costruzioni
External person
Marcin Koniorczyk
- Technical University of Lodz
- Lodz University of Technology
- Tech. Univ. of Lodz
- Dept. of Building Physics and Building Materials, Tech. University of Lodz
External person
Cass T. Miller
- University of North Carolina
- University of North Carolina at Chapel Hill
- University of North Carolina at Chapel Hill
- University of North Carolina at Chapel Hill
- Department of Environmental Sciences and Engineering, University of North Carolina at Chapel Hill
- Department of Environmental Sciences and Engineering
External person
E. Turska
- Polish Acad of Sciences
- Polish Academy of Sciences
- IFTR
- Univ of Padova
- University of Padua
- University of Padova
- Polish Academy of Sciences
External person
P. Baggio
- Università di Padova
- University of Trento
- University of Padua
- University of Trento
- University of Padova
- University of Trento
- Dipto. Ingegneria Civile Ambientale
- 1st. Fisica Tecnica
- Istituto di Fisica Tecnica
External person
Pietro Mascheroni
- University of Padova
- University of Padua
- Dipartimento di Ingegneria Civile
- Dipartimento di Ingegneria Civile Edile e Ambientale
- Dept. of Civil, Environmental and Architectural Eng., University of Padua
External person
K. Wisniewski
- IFTR
- Polish Acad of Sciences
- Polish Academy of Sciences
- Polish Academy of Sciences
External person
Maria Lazari
- University of Padova
- University of Padua
- University of Padova
- Department of Civil, Environmental and Architectural Engineering, Università di Padova
- Dept. of Civil, Environmental and Architectural Eng., University of Padua
External person
C. Pellegrino
- University of Padova
- University of Padua
- University of Padua
- University of Padova
- Dept. Constructions Transportations
External person
Xikui Li
- Dalian University of Technology
- The State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology
- Dalian University of Technology
External person
P. Brunello
- Università IUAV
- Universita IUAV di Venezia
- University of Padua
- EURATOM
- University of Padova
- Dipartimento di Costruzione dell'Architettura
- Università Iuav di Venezia
- Dept. of Industrial Engineering
- Agenzia nazionale per le nuove tecnologie, l'energia e lo sviluppo economico sostenibile
External person
A. Nardin
- Università di Padova
- University of Padua
- Universitá di Padova
- University of Padua
- University of Padova
- Dipartimento di Costruzioni e Trasporti
- Department of Structural Engineering
External person
T. D. Cao
- Darmstadt University of Technology
- Texas Tech University
- Mississippi State University
- Department of Mechanical Engineering
- University of Padova
- Department of Mechanical Engineering, Whitacre College of Engineering, Texas Tech University
- Center for Advanced Vehicular Systems (CAVS) and Department of Civil and Environmental Engineering
- Texas Tech University at Lubbock
- Dipartimento di Ingegneria Civile
- Texas Tech University
External person
Johannes Kremheller
- Technical University of Munich
- Technical University of Munich
- Institute for Computational Mechanics
External person
M. Papadrakakis
- National Technical University of Athens
- Institute of Structural Analysis and Antiseismic, Research Nat. Tech., University Athens
- University Athens
- National and Kapodistrian University of Athens
- National Technical University of Athens
- University Athens
- National Technical University of Athens
- Institute of Structural Analysis and Antiseismic Research
- Institute of Structural Analysis and Antiseismic Research
External person
P. Ladevèze
- Paris 6 University
- Universite Paris 6
- LMT-Cachan (ENS Cachan / CNRS / Paris 6 University)
- Sorbonne Université
- École normale supérieure Paris-Saclay
- Université Pierre et Marie Curie-Paris 6
- Ecole Normale Supérieure de Cachan
- Universite Pierre et Marie Curie
- Université Paris-Saclay
- ComUE Paris-Saclay
- CNRS
External person
Youyao Du
- Dalian University of Technology
- The State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology
- Dalian University of Technology
External person
M. Pastor
- CETA
- Centro de Estudios y Experimentacion de Obras Publicas
- Centro de Estudios y Experimentacion de Obras Publicas
- CETA
- Technical University of Madrid
External person
J. Principe
- CIMNE, Universitat Politécnica de Catalunya
- Polytechnic University of Catalunya
- Universitat Politècnica de Catalunya, Edifici C-1
- Polytechnic University of Catalonia
- Centre Internacional de Mètodes Numèrics en Enginyeria(CIMNE)
- Technical University of Catalunya
- Generalitat de Catalunya
- International Center for Numerical Methods in Engineering
External person
C. Peruzzo
- Department of Civil, Environmental and Architectural Engineering, Università di Padova
- University of Padova
- Ecole Polytechnique Federale de Lausanne
- Swiss Federal Institute of Technology Lausanne
External person
R. W. Lewis
- Department of Civil Engineering
- Swansea University
- Institute of Numerical Methods in Engineering, University College of Swansea
External person
D. Dureisseix
- CNRS
- Universite Paris 6
- LMGC (Montpellier 2 University / CNRS)
- Universite Montpellier II
- Sorbonne Université
- Université Pierre et Marie Curie-Paris 6
- CNRS
- Universite Pierre et Marie Curie
- Laboratoire LMGC, Université de Montpellier II, CNRS UMR 5508
- University of Montpellier Health Centre
- Université Paris-Saclay
- ComUE Paris-Saclay
- Université de Montpellier
External person
CE Majorana
External person
Przemyslaw Litewka
- Poznan University of Technology
- Poznań University of Technology
- Poznan University of Technology
- Institute of Structural Engineering
External person
Pierre Delage
- Navier Institute
- École des Ponts ParisTech
- Navier Institute
- CERMES
- Navier Institute
External person
E. A. Meroi
- Istituto Universitario di Architettura di Venezia
- Università di Padova
- Universita di Padova
- University of Padua
- University of Padova
- Dipartimento di Costruzione dell' Architettura
- Ist. Sci. e Tec. Delle Costruzioni
External person
Anna V. Saetta
- Ingegneria - Università di Padova -
- Dipartimento di Costruzione dell'Architettura Ist. Universitario di Architettura - Tolentini 191 -
- University of Padua
- Universita IUAV di Venezia
- University of Padova
- Istituto di Scienza
- Università Iuav di Venezia
External person
M. Milosevic
- Bioengineering Research and Development Center - BioIRC
- R and D Center for Bioengineering
- Belgrade Metropolitan University
- Bioengineering Research and Development Center
- Bioengineering R and D Center
- Baylor College of Medicine
- Research and Development Center for Bioengineering
- Belgrade University
- Universität Belgrad
- Houston Methodist
- Research and Development Center for Bioengineering
- Bioengineering Research and Development Center
- Faculty of Information Technologies
- Research and Development Center for Bioengineering
- University of Kragujevac
- Methodist Hospital System
- Belgrade Metropolitan University
External person
Zimi Sawacha
- University of Padova
- University of Padua
- University of Padova
- Department of Information Engineering
External person
R. Zanino
- Polytechnic University of Turin
- Politeenico
- University of Turin
- University of Torino
- Politecnico di Torino
- Dipartimento di Energetica
- Dipartimento di Energetica
External person
Luigi Preziosi
- Polytechnic University of Turin
- Politecnico di Torino
- Dipartimento di Scienze Matematiche
- Department of Mathematical Sciences
External person
Andrea Galtarossa
- Università di Padova
- Univ. degli Studi di Padova
- Universita di Padova
- University of Padua
- University of Padova
External person
L. Savoldi Richard
- Polytechnic University of Turin
- Politeenico
- University of Turin
- University of Torino
- Politecnico di Torino
- Dipartimento di Energetica
- Dipartimento di Energetica
External person
Marco Schiano
- SAIFO Srl
- Università di Padova
- Universita di Padova
- University of Padua
- University of Padova
External person
S. Shelton
- University of North Carolina at Chapel Hill
- University of North Carolina
- University of North Carolina at Chapel Hill
- University of North Carolina at Chapel Hill
- Department of Environmental Sciences and Engineering, University of North Carolina at Chapel Hill
External person
Gianfranco Bilardi
- Università di Padova
- Universita di Padova
- University of Padua
- University of Padova
- Dipto. Ingegneria dell'Informazione
- Dipartimento di Elettronica e Informatica
External person
Roberto Scotta
- University of Padova
- Univ of Padova
- University of Padua
- University of Padova
- Dipartimento di Costruzioni e Trasporti
External person
L. A. Contri
- Engineering, Padua, Italy
- University of Padua
- University of Padova
- Univ of Padova, Faculty of
- Dipartimento di Ingegneria Civile
External person
Tomasz Sadowski
- Lublin University of Technology
- Lublin University of Technology
- Lublin University of Technology
External person
P. L. Ribani
- Universita' di Bologna
- Università di Bologna
- University of Bologna
- University of Bologna
- Dipartimento di Ingegneria Elettrica
External person
René de Borst
- University of Padua
- University of Glasgow
- Regius Chair of Civil Engineering and Mechanics, University of Glasgow School of Engineering
- University of Padova
- University of Glasgow
- Dipartimento di Costruzioni e Trasporti
External person
Geppino Pucci
- Università di Padova
- Universita di Padova
- University of Padua
- University of Padova
- Dipto. Ingegneria dell'Informazione
- Dipartimento di Elettronica e Informatica
External person
A. I. Borovkov
- Peter the Great St. Petersburg Polytechnic University
- St. Petersburg State Polytechnical University
- Computational Mechanics Laboratory (CompMechLab)
External person
Wang Xicheng
- Dalian University of Technology
- Dalian University of Technology
- Res. Inst. of Engineering Mechanics
External person
Patrizia Trovalusci
- Sapienza-University of Rome
- Department of Structural and Geotechnical Engineering, Sapienza-University of Rome
- Patrizia Trovalusci Department of Ingegneria Strutturale e Geotecnica
- Sapienza-University of Rome
- University of Rome La Sapienza
External person
Eugenio Oñate
- Generalitat de Catalunya
- Polytechnic University of Catalonia
- International Center for Numerical Methods in Engineering
External person
Yuri Bazilevs
- Department of Structural Engineering, University of California
- University of California at San Diego
External person
Wing Kam Liu
- Northwestern University
- Department of Mechanical Engineering, Northwestern University
- Sungkyunkwan University
- Distinguished Scientists Program Committee, King Abdulaziz University (KAU)
- King Abdulaziz University
- Northwestern University
- School of Mechanical Engineering
- Samsung-SKKU Graphene Center (SSGC)
- King Abdulaziz University
External person
Jacques M. Huyghe
- Eindhoven University of Technology
- Eindhoven University of Technology
- Dept. of Mechanical Engineering
External person
A. Menin
- University of Padua
- University of Padua
- University of Padova
- Department of Architecture
External person
Melania Carfagna
- Politecnico di Torino
- Polytechnic University of Turin
- Dipartimento di Scienze Matematiche
External person
Ernst W. Remij
- Eindhoven University of Technology
- Eindhoven University of Technology
- Dept. of Mechanical Engineering
External person
A. N. Natali
- Università di Padova
- University of Padua
- University of Padova
- Dipartimento di Costruzioni e Trasporti
External person
D. Néron
- Paris 6 University
- LMT-Cachan (ENS Cachan / CNRS / Paris 6 University)
- Sorbonne Université
- École normale supérieure Paris-Saclay
- Université Pierre et Marie Curie-Paris 6
- Ecole Normale Supérieure de Cachan
- Universite Pierre et Marie Curie
- Université Paris-Saclay
- ComUE Paris-Saclay
- CNRS
External person
A. S. Nemov
- Peter the Great St. Petersburg Polytechnic University
- St. Petersburg State Polytechnical University
- Computational Mechanics Laboratory (CompMechLab)
External person
A. Ehrlacher
- Université di Padova
- ENPC
- University of Padua
- École des Ponts ParisTech
- Navier Institute
- University of Padova
- Dipartimento di Costruzioni e Trasporti
- CERMES
- Navier Institute
External person
Carlo G. Someda
- Università di Padova
- Univ. degli Studi di Padova
- Universita di Padova
- University of Padua
- University of Padova
- IEEE
External person
E. Stein
- Costruzioni
- Institut für Baumechanik und Numerische Mechanik
- Istituto di Scienza e Tecnica delle
- Institut für Baumechanik und Numerische Mechanik
- University of Hannover
External person
Rui C. Pereira
- Italian Institute of Technology
- Italian Institute of Technology
- Laboratory of Nanotechnology for Precision Medicine
External person
C. Cobelli
- University of Padua
- University of Padova
- Department Information Engineering, University of Padua
- University of Padua
- University of Padova
- Department of Information Engineering
External person
G. A. Khoury
- University of London
- London University
- Imperial College London
- Imp. Coll. Sch. Sci., Technol./Med.
- Department of Civil and Environmental Engineering
External person
A. Witek
- Technical University of Lodz
- Lodz University of Technology
- Tech. Univ. of Lodz
- Dept. of Building Physics and Building Materials, Tech. University of Lodz
External person
F. Meftah
- Université Cergy-Pontoise
- CY Cergy Paris Université
- Département de Biologie
- Laboratoire Mécanique et Matériaux du Génie Civil
External person
Cinzia Stigliano
- Department of Translational Imaging and Department of Nanomedicine, The Methodist Hospital Research Institute
- Baylor College of Medicine
- Methodist Hospital Research Institute
- Department of Biosciences, Biotechnology and Pharmacological Sciences, University of Bari
- The Methodist Hospital Research Institute
- University of Bari
- University of Bari
- SM8
- University of Bari Aldo Moro
- Houston Methodist
- Department of Translational Imaging and Department of Nanomedicine
- Comprehensive Epilepsy Program
- Methodist Hospital
- Methodist Hospital System
External person
Mauro Bianco
- Università di Padova
- Universita di Padova
- University of Padua
- University of Padova
- Dipto. Ingegneria dell'Informazione
- Dipartimento di Elettronica e Informatica
External person
R. D. Wood
- University of Swansea
- Swansea University
- Swansea University
- Department of Civil Engineering
External person
X. Wang
- Dalian University of Technology
- Dalian University of Technology
- Res. Inst. of Engineering Mechanics
External person
Andrea Tommasini
- Università di Padova
- Univ. degli Studi di Padova
- Universita di Padova
- University of Padua
- University of Padova
External person
Victor N. Naumov
- Univ of Padova
- Dept. Mech. and Processes of Contr.
- University of Padua
- Peter the Great St. Petersburg Polytechnic University
- University of Padova
- St. Petersburg State Polytechnical University
- St. Petersburg State Tech. Univ.
External person
Jean François Molinari
- Swiss Federal Institute of Technology Lausanne
- Ecole Polytechnique Federale de Lausanne
- Civil Engineering Institute
External person
Vladimir A. Palmov
- Univ of Padova
- Dept. Mech. and Processes of Contr.
- University of Padua
- Peter the Great St. Petersburg Polytechnic University
- University of Padova
- St. Petersburg State Polytechnical University
- St. Petersburg State Tech. Univ.
External person
Sebastian Brandstaeter
- Technical University of Munich
- Technische Universität Hamburg-Harburg
- Hamburg University of Technology
External person
Filippo Navarra
External person
S. Durand
- SEMT/LM2S
- Université Paris-Saclay
- ComUE Paris-Saclay
- Commissariat à l'Energie Atomique
External person
Eugenio Oñate
- Generalitat de Catalunya
- Polytechnic University of Catalonia
- International Center for Numerical Methods in Engineering
External person
Hongwu W. Zhang
- Dalian University of Technology
- Dalian University of Technology
- Department of Engineering Mechanics
External person
G. Maier
- University of Padua
- University of Padova
- Dipartimento di Costruzioni e Trasporti
External person
Annamaria Guiotto
- University of Padova
- University of Padua
- University of Padova
- Department of Information Engineering
External person
Borzouyeh Khanghahi-Bala
- Department of Civil and Environmental Engineering
- Shiraz University
External person
F. Bellina
- Dipartimento d'Ingegneria Elettrica, Gestionale e Meccanica
- University of Udine
- Università di Udine
- Università di Udine
External person
Antonio Gens
- Technical University of Catalunya
- Polytechnic University of Catalonia
- Technical University of Catalunya
External person
I. B. Voynov
- Peter the Great St. Petersburg Polytechnic University
- St. Petersburg State Polytechnical University
- Computational Mechanics Laboratory (CompMechLab)
External person
Jean Claude Grandidier
- École nationale supérieure de mécanique et d'aérotechnique
- ENSMA Ecole Nationale Superieure de Mecanique et dAerotechnique
- Institut p'
External person
Sei Young Lee
- The University of Texas at Austin
- University of Texas-Austin
- University of Texas at Austin
- Samsung
- Rice University
- Samsung Electronics
- Univ. of Texas
- Global Production Technology Center
- Department of Biomedical Engineering
- University of Texas Health Science Center at Houston
- Department of Mechanical Engineering
- Brown Foundation Institute of Molecular Medicine
- Department of Mechanical Engineering
- Department of Bioengineering
External person
Sergio R. Idelsohn
- Inter. Centre for Numerical Methods in Eng. (CIMNE), Catalan Inst. for Research Advanced Studies (ICREA)
- Catalan Inst. for Research Advanced Studies (ICREA)
- ICREA
- Institució Catalana de Recerca I Estudis Avançats
External person
H. W. Zhang
- Department of Engineering Mechanics, Dalian University of Technology
- Dalian University of Technology
- Dalian University of Technology
- State Key Laboratory of Structural Analysis and Industrial Equipment
- Research Institute of Engineering Mechanics
- Stt. Key Lab. Struct. Anal./I.E.
- Department of Engineering Mechanics
- Res. Inst. of Engineering Mechanics
- Stt. Key Lab. Struct. Anal. I.
- Res. Inst. Eng. Mechanics
External person
P. Favia
- Department of Civil, Environmental and Architectural Engineering, Università di Padova
- University of Padova
External person
Okan Yilmaz
- Swiss Federal Institute of Technology Lausanne
- Ecole Polytechnique Federale de Lausanne
- Civil Engineering Institute
External person
Paolo Decuzzi
- Italian Institute of Technology
- Italian Institute of Technology
- Houston Methodist
- Baylor College of Medicine
- Laboratory of Nanotechnology for Precision Medicine
- Department of Drug Discovery and Development
- Department of Translational Imaging and Department of Nanomedicine, The Methodist Hospital Research Institute
- Magna Græcia University
- Department of Experimental and Clinical Medicine
- Laboratory of Proteomics and Mass Spectrometry
- Politecnico di Bari
- Dipto. Progettazione Prod. I.
- Department of Experimental and Clinical Medicine
- University of Texas Health Science Center at Houston
- BioNEM-Center of Bio-Nanotechnology and Engineering for Medicine
- Brown Foundation Institute of Molecular Medicine
- School of Health Information Sciences
- Ctro. Ecccllcnza Meccanica Comp.
- Department of Experimental and Clinical Medicine
- Department of Experimental and Clinical Medicine
- Bio Nano Engineering and Technology for Medicine (BioNEM)
- The Methodist Hospital Research Institute
- Dipartimento di Ingegneria Meccanica e Gestionale
- Department of Mechanical and Biomedical Engineering
- Center of Excellence in Computational Mechanics
- Center of Excellence in Computational Mechanics - CEMeC
- Center of Excellence in Computational Mechanics
- Ctr./Excellence/Computational Mech.
- Department of Translational Imaging and Department of Nanomedicine
- Department of Experimental and Clinical Medicine
- Department of Nano Medicine and Biomedical Engineering
- Ctr. Excellence in Compl. Mechanics
- Department of Experimental and Clinical Medicine, University of Magna Graecia
- Dpto. di Progettazione Prod. Indus.
- Centro di Eccellenza in Meccanica Computazionale
- TASC-INFM CNR
- Center for the Rational Design of Multifunctional Nanoconstructs
- Dipto. di Med. Sperimentale e Clin.
- Heart and Lung Research Institute
- Ctro. di Eccellenza la Mecc. Comput.
- Ohio State University
- Department of Experimental and Clinical Medicine
- Department of NanoMedicine and Biomedical Engineering
- Medical School
- Brown Foundation Institute of Molecular Medicine for the Prevention of Human Disease
- Department of Mechanics, Mathematics and Management and Centre of Excellence for Computational Mechanics
- Consiglio Nazionele delle Ricerche (CNRIRIS)
- Computational Mechanics of Solids (COMES)
- Nanofabrication Department
- Department of Experimental and Clinical Medicine
- University of Magna Graecia
- Dept. Ingegneria Mec. Gestionale
- IOR
- Dipartimento di Progettazione e Produzione Industriale
- Nanotribology Lab. Info. Storage M.
- Ohio State University
- Dorothy M. Davis Heart and Lung Institute
- Center for the Rational Design of Multifunctional Nanoconstructs
- ASME/NanoEngineering for Medicine and Biology
- Dept. of Exp. and Clinical Medicine
- Dip Ing. Mecc e Gest
- Princeton University
- University of Magna Graecia-IT
- BioNEM-Center of BioNanotechnology and Engineering for Medicine
- Department of Clinical and Experimental Medicine
- TASC
- Department of Mechanical Engineering
- Univ. of Texas
- Department of Experimental and Clinical Medicine
- Universita' degli Studi Magna Græcia
- Department of Pediatrics
- Children's Hospital of Philadelphia
- Methodist Hospital
- Stanford University
- Politecnico
- Methodist Hospital System
- Magna Græcia University
- Polytechnic University of Bari
- University of Pennsylvania
- National Institute for Nuclear Physics
- University of Texas at Austin
- Princeton University
External person
J. L. Chaboche
- The French Aerospace Lab
- ONERA (French Aerospace Centre)
- Office national d'études et de recherches aérospatiales
External person
P. Steinmann
- University of Kaiserslautern
- University of Kaiserslautern
- University of Kaiserslautern
- Department of Applied Mechanics
- Department of Applied Mechanics
- University of Kaiserslautern
External person
Francisco Chinesta
- Ecole Centrale Nantes
- École centrale de Nantes
- CNRS
- Ecole Centrale Nantes
External person
R. Ngaradoumbe Nanhorngué
- University of Padua
- University of Padua
- University of Padova
- Department of Civil, Environmental and Architectural Engineering, Università di Padova
External person
G. Ricceri
- University of Padua
- University of Padua
- University of Padova
- Hydraulic, Marine and Geotechnical Engineering Department
External person
A. Grillo
- Polytechnic University of Turin
- Politecnico di Torino
- Dipartimento di Scienze Matematiche
External person
Roman Lackner
- Technical University of Munich
- Technical University of Munich
- Technical University of Munich
- Vienna University of Technology
- Institute for Mechanics of Materials and Structures
External person
Giorgio Zavarise
- Polytechnic University of Turin
- Politecnico di Torino
- Department of Structural Engineering and Geotechnics
External person
A. Maschio
External person
Yuanbo Liang
- Dalian University of Technology
- The State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology
- Dalian University of Technology
External person
Lyesse Laloui
- EPFL
- Swiss Federal Institute of Technology Lausanne
- Ecole Polytechnique Federale de Lausanne
- Soil Mechanics Laboratory
External person
W. Grymin
- Technical University of Łódź
- Lodz University of Technology
- Tech. Univ. of Lodz
- Dept. of Building Physics and Building Materials, Tech. University of Lodz
External person
P. Kanouté
- The French Aerospace Lab
- ONERA (French Aerospace Centre)
- Office national d'études et de recherches aérospatiales
External person
F. Gnesotto
- EURATOM
- Agenzia nazionale per le nuove tecnologie, l'energia e lo sviluppo economico sostenibile
External person
Rongtao Li
- Dalian University of Technology
- Dalian University of Technology
- The State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology
External person
P Mascheroni
External person
B. Milicevic
- Bioengineering Research and Development Center - BioIRC
- University of Kragujevac
- Bioengineering Research and Development Center
External person
Marianne Beringhier
- École nationale supérieure de mécanique et d'aérotechnique
- ENSMA Ecole Nationale Superieure de Mecanique et dAerotechnique
- Institut p'
External person
R. Codina
- Universitat Politècnica de Catalunya, Edifici C-1
- Centre Internacional de Mètodes Numèrics en Enginyeria(CIMNE)
- Generalitat de Catalunya
- Polytechnic University of Catalonia
- International Center for Numerical Methods in Engineering
External person
Jin Ying Bi
- Dalian University of Technology
- Dalian University of Technology
- Research Institute of Engineering Mechanics
- State Key Laboratory of Structural Analysis and Industrial Equipment
External person
Qinglin Duan
- Dalian University of Technology
- The State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology
External person
M. Fremont
- Laboratoire Central des Ponts et Chaussées
- Laboratoire central des ponts et chaussées
- Laboratoire Central des Ponts et Chaussées
External person
Massimo Fabris
- University of Padova
- University of Padua
- University of Padova
- Department of Civil, Environmental and Architectural Engineering, Università di Padova
External person
Daniele Di Mascolo
- University of Magna Graecia
- Department of Experimental and Clinical Medicine, University of Magna Graecia
- Magna Græcia University
- Magna Græcia University
- Houston Methodist
- Baylor College of Medicine
- Italian Institute of Technology
- Laboratory of Nanotechnology for Precision Medicine
- Department of Translational Imaging and Department of Nanomedicine
- Department of Experimental and Clinical Medicine
- Department of Experimental and Clinical Medicine
- Methodist Hospital System
External person
Gang Bao
- Department of Biomedical Engineering, Georgia Institute of Technology and Emory University
- Georgia Institute of Technology
- Rice University
- Rice University
- Emory University
External person
Yu Jun Cui
- Navier Institute
- École des Ponts ParisTech
- Navier Institute
- CERMES
- Navier Institute
External person
D. T. Cao
- Department of Mechanical Engineering, Whitacre College of Engineering, Texas Tech University
- Texas Tech University at Lubbock
- Texas Tech University
External person
Yuanbo Liang
- Dalian University of Technology
- Dalian University of Technology
- The State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology
External person
V. Simic
- Bioengineering Research and Development Center - BioIRC
- Belgrade University
- Bioengineering Research and Development Center
- Faculty for Engineering Sciences
- University of Kragujevac
External person
F. Benboudjema
- Ecole Normale Supérieure de Cachan
- École normale supérieure Paris-Saclay
- Ecole Normale Supérieure de Cachan
- Laboratoire de Mécanique et Technologie
- Université Paris-Saclay
- ComUE Paris-Saclay
- Ecole Normale Supérieure de Cachan
External person
Joris J C Remmers
- Eindhoven University of Technology
- Eindhoven University of Technology
- Dept. of Mechanical Engineering
External person
Qinglin Duan
- Dalian University of Technology
- The State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology
- Dalian University of Technology
External person
Lena Yoshihara
- Technical University of Munich
- Technical University of Munich
- Institute for Computational Mechanics
External person
P. G. Pavan
- University of Padua
- University of Padova
- Dipartimento di Costruzioni e Trasporti
External person
Xiaoyong Zhan
- Univ of Padova
- University of Padua
- University of Padova
- Ist. Sci. e Tec. Delle Costruzioni
External person
Christoph Alexiou
- Friedrich-Alexander University Erlangen-Nürnberg
- Universitätsklinikum Erlangen
- ENT-Department
External person
C. De Sa
- Ecole Normale Supérieure de Cachan
- École normale supérieure Paris-Saclay
- Ecole Normale Supérieure de Cachan
- Laboratoire de Mécanique et Technologie
- Université Paris-Saclay
- ComUE Paris-Saclay
- Ecole Normale Supérieure de Cachan
External person
Konrad Bergmeister
- Institute of Structural Engineering
- University of Natural Resources and Life Sciences, Vienna
External person
Linh Tuan Nguyen
- École nationale supérieure de mécanique et d'aérotechnique
- ENSMA Ecole Nationale Superieure de Mecanique et dAerotechnique
- Institut p'
External person
Giuseppe Gambolati
- University of Padua
- Dipartmento di Metodi E Modelli Matematici
- University of Padova
External person
Cesare Bonacina
- Department of Technical Physics
- University of Padua
- University of Padova
External person
Mareva Passarotto
- Università degli Studi di Padova
- University of Padua
- University of Padova
- Dipartimento di Ingegneria Civile Edile e Ambientale
External person
G. Zuccolo
- Faculty of Engineering
- Dept. of Struct. and Transp. Eng.
- Faculty of Engineering
- Dept. of Struct. and Transp. Eng.
External person
Matthias Zeiml
- Vienna University of Technology
- Vienna University of Technology
- Vienna University of Technology
- Institute for Mechanics of Materials and Structures
External person
Y. Berthaud
- Ecole Normale Supérieure de Cachan
- École normale supérieure Paris-Saclay
- Ecole Normale Supérieure de Cachan
- Laboratoire de Mécanique et Technologie
- Université Paris-Saclay
- ComUE Paris-Saclay
- Ecole Normale Supérieure de Cachan
External person
Xiaoyong Zhan Xiaoyong
External person
H. Wang
- Dalian University of Technology
- Dalian University of Technology
- Research Institute of Engineering Mechanics
- State Key Laboratory of Structural Analysis and Industrial Equipment
External person
Jae Hyun Chung
- Mechanical Engineering, University of Washington
- University of Washington
- University of Washington Cardiovascular Health Research Unit
- Department of Mechanical Engineering
- University of Washington
External person
Norhan Abd Rahman
- University of Wales Swansea
- Swansea University
- Swansea University
- Department of Civil Engineering
External person
Siavash Ghabezloo
- Institut français des sciences et technologies des transports, de l'aménagement et des réseaux
- Navier Institute
External person
Thomas L. Moore
- Italian Institute of Technology
- Laboratory of Nanotechnology for Precision Medicine
External person
F. Brunello
External person
Roger D. Kamm
- Massachusetts Institute of Technology
- Department of Mechanical Engineering
- Division of Comparative Medicine
- Massachusetts Institute of Technology
External person
Thomas J R Hughes
- The University of Texas at Austin
- University of Texas at Austin
- Institute for Computational Engineering and Sciences, University of Texas at Austin
- Institute for Computational Engineering and Sciences, University of Texas at Austin, Stop C0200
- Univ. of Texas
External person
V. Achilli
- University of Padua
- University of Padua
- University of Padova
- Department of Architecture
External person
J. M. Qin
- Dalian University of Technology
- Dalian University of Technology
- Research Institute of Engineering Mechanics
- State Key Laboratory of Structural Analysis and Industrial Equipment
External person
Christian Miehe
- University of Stuttgart
- Institute of Applied Mechanics
- University of Stuttgart
External person
Songge Zhang
- Dalian University of Technology
- The State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology
External person
Duc Toan Cao
- Università degli Studi di Padova
- University of Padua
- University of Padova
- Dipartimento di Ingegneria Civile Edile e Ambientale
External person
P. Macini
- University of Bologna
- University of Bologna
- University of Bologna
- Department of Chemical and Mining Engineering and of Environmental Technologies
External person
E. Mesini
- University of Bologna
- University of Bologna
- University of Bologna
- Department of Chemical and Mining Engineering and of Environmental Technologies
External person
Shaolie S. Hossain
- Baylor College of Medicine
- Texas Heart Institute
- University of Texas at Austin
- Department of Translational Imaging, Methodist Hospital Research Institute
- The Methodist Hospital Research Institute
- Methodist Hospital Research Institute
- Univ. of Texas
- Houston Methodist
- Department of Molecular Cardiology
- Institute for Computational Engineering and Sciences, University of Texas at Austin, Stop C0200
- Methodist Hospital System
External person
O. M. Heeres
- Delft University of Technology
- Technical University of Delft
- Koiter Institute Delft
- Koiter Institute Delft
External person
C. Bonacina
- Università di Padova
- University of Padua
- University of Padova
- 1st. Fisica Tecnica
External person
R. Scandiuzzi
- Univ of Padua
- University of Padua
- University of Padova
- Ist. Sci. e Tec. Delle Costruzioni
External person
Horacio D. Espinosa
- Department of Mechanical Engineering, Northwestern University
- Northwestern University
- Northwestern University
External person
Mathieu Nuth
- EPFL
- Swiss Federal Institute of Technology Lausanne
- Ecole Polytechnique Federale de Lausanne
- Soil Mechanics Laboratory
External person
E. A.S. Arcilla
External person
R. W. Lewis
External person
S. Zhang
- Dalian University of Technology
- Dalian University of Technology
- Research Institute of Engineering Mechanics
External person
Huajian Gao
- School of Engineering, Brown University
- Brown University
- Agency for Science, Technology and Research, Singapore
- Nanyang Technological University
External person
D. M.J. Smeulders
- Eindhoven University of Technology
- Eindhoven University of Technology
- Dept. of Mechanical Engineering
External person
M. Kamiński
- Rice University
- Tech. Univ. of Lodz
- Division of Mechanics of Materials
- Department of Civil Engineering 215
- Lodz University of Technology
- Rice University
External person
R. Matteazzi
- Università di Padova
- University of Padua
- University of Padova
- Dipartimento di Costruzioni e Trasporti
External person
Simonetta Cola
- University of Padova
- University of Padua
- University of Padova
- Department of Hydraulic Engineering, Maritime, Environmental, and Geotechnics
- Department of Image
External person
L. Zhou
- Dalian University of Technology
- Dalian University of Technology
- Research Institute of Engineering Mechanics
External person
Mateusz Wyrzykowski
- Swiss Federal Laboratories for Materials Science and Technology
- Swiss Federal Laboratories for Materials Science and Technology (Empa)
- Swiss Federal Laboratories for Materials Science and Technology
- Tech. Univ. of Lodz
- Empa
- Lodz University of Technology
External person
Paolo Simonini
- University of Padova
- University of Padua
- University of Padova
- Department of Hydraulic Engineering, Maritime, Environmental, and Geotechnics
- Department of Image
External person
M. Guarnieri
- National Research Council of Italy
- IOR
- CNR-EURATOM, Istituto Gas Ionizzati,
External person
C. Taylor
External person
G. Romaro
External person